Knauf Insulation Removal & Replacement Nationwide | Walt’s Insulation

Knauf Insulation Removal & Replacement in Glendale: What to Know First

Knauf insulation removal and replacement in Glendale typically runs $1,800 to $4,200 for an average attic, and our crew can usually complete the job in one day. We’re an independent Knauf service provider, not a manufacturer-authorized shop, which means we tell you the truth about whether your Knauf insulation actually needs to come out or can be worked around. If you’re dealing with rodent damage, water intrusion, or aging Knauf batts that have compressed and lost their R-value, call (747) 246-7237 and a live person picks up, day or night.

Call (747) 246-7237

This page is for Glendale homeowners who already have Knauf insulation in their attic or walls and need to know what removal and replacement actually involves, what it costs, and who to trust with the work.

How Knauf Products Fail, and How We Fix Them

• Knauf EcoBatt (fiberglass batts) compression and settling. EcoBatt is a solid product when installed right, but Glendale’s attic heat cycles cause the binder in older batts to break down over 15 to 20 years. The batts slump, especially in vaulted ceiling cavities, and lose up to 30% of their rated R-value. We pull the old batts, air-seal the cavity, and install fresh Knauf or Owens Corning batts cut to fit tight against framing. A compressed batt is just an expensive air filter.
• Knauf Jet Stream (blown-in fiberglass) rodent contamination. This is the big one we see all over Glendale, from Adams Hill to Verdugo Woodlands. Rats and squirrels tunnel through blown-in fiberglass and turn it into a latrine. If you’re smelling something in the attic and you have Jet Stream up there, it’s almost always rodent activity, not the insulation itself breaking down. We remove the contaminated material with a commercial vacuum, sanitize the attic deck, rodent-proof the entry points, and blow in fresh insulation.
• Knauf R-38 and R-30 batts with moisture wicking from roof leaks. Fiberglass doesn’t absorb much water, but it holds it against drywall and framing long enough to grow mold on the paper facing and the ceiling below. In older Glendale homes with clay tile roofs, a small cracked tile can drip for months before you see the stain. By the time the ceiling shows it, the insulation above is done. We remove the wet batts, let the cavity dry properly, and replace before re-insulating.
• Knauf faced batts with deteriorated kraft paper vapor barrier. The kraft facing on Knauf batts was never meant to last 30 years in a hot attic. In homes built through the 1980s and 1990s in Glendale, we regularly see facing that’s gone brittle, torn, or peeled away from the staples. Once the facing fails, it’s not doing its moisture-control job and the batt is loose in the cavity. Full removal and replacement with modern unfaced or smart-vapor-retarder material is the fix.
• Knauf blown-in that was installed over old vermiculite. We run into this in pre-1960 Glendale homes around Rossmoyne and El Miradero. Some previous contractor blew Knauf fiberglass right over old vermiculite that may contain asbestos. You can’t just top it off. That’s a full containment removal under negative air pressure, and it’s a job you need a licensed, experienced crew for, not a handyman with a Shop-Vac. We handle the removal and replace with fresh blown-in fiberglass or cellulose to code.

Our Knauf Insulation Removal & Replacement Process

Here’s what a Knauf removal job looks like when you call us in Glendale:

1. 1
   The assessment. We inspect the attic or wall cavity, identify what Knauf product you have, what failed, and why. If the insulation is still doing its job, we’ll tell you, even if that means we walk away without a ticket. Honest answers matter more than a quick sale.
2. 2
   The written quote. You get a line-item price before any work starts. No vague numbers. If you already have an estimate from another contractor, we’ll give you a free second opinion on it.
3. 3
   Containment and removal. Lay down floor protection, set up negative air containment where needed, remove the old Knauf material with commercial HEPA-filtered vacuums. Bag it, seal it, and haul it out.
4. 4
   Attic prep and air sealing. Rodent-proofing if needed, air sealing around top plates, can lights, and plumbing vents. Insulation doesn’t fix drafts; air sealing does.
5. 5
   Replacement install. Fresh Knauf, Owens Corning, Rockwool, or Johns Manville product installed to the R-value your Glendale home needs, which usually means R-38 to R-49 in the attic. We name the brands, not just “quality materials,” so you know exactly what you’re paying for.
6. 6
   The walkthrough. We show you the finished work, explain what we did and why, and back it with the Done Right Promise: if it’s not done right, we make it right. For life.

What Knauf Insulation Removal & Replacement Costs in Glendale

The price depends on what you’re dealing with, so here are the ranges we see for real Glendale jobs:

• Standard Knauf batt removal and replacement, 1,000 sq ft attic: $1,800 to $2,600
• Contaminated or rodent-damaged Knauf blown-in removal and replacement, 1,000 sq ft attic: $2,400 to $3,800
• Vermiculite remediation with Knauf or other brand replacement: $4,000 to $8,000+ depending on lab results and attic size
• Wall cavity Knauf removal and re-insulation, per wall section: $600 to $1,200

What moves the price: attic access clearance, how much rodent damage is present, whether vermiculite testing comes back positive, and whether you need additional air sealing or rodent proofing. Call (747) 246-7237 for a firm quote based on your actual attic. Estimates are free, and there’s no trip charge inside Los Angeles County.

Why Glendale Homeowners Call Walt’s Insulation for Knauf Work

We’ve been at this since 2000, and the reason Glendale homeowners keep our number is simple: you get a real answer from a real person every time you call. No voicemail tree, no call center, no “we’ll get back to you.” Walt Brenner built this business on the idea that if you wouldn’t recommend a job to your own mother, don’t do it for a customer. Our techs are background-checked and uniformed, so you know exactly who’s in your attic. We install Knauf, Owens Corning, Rockwool, CertainTeed, Icynene, Demilec, Johns Manville, and GreenFiber, plus Reflectix for radiant barrier work, so we’re not married to one brand when another fits your home better. And every job is covered by the Done Right Promise. As Walt says: “Do it right the first time or you’ll be doing it twice, and the second time costs more.”

FAQs