Owens Corning Home Energy Audit in Glendale: What to Know First
An Owens Corning home energy audit in Glendale typically costs between $199 and $450 depending on home size, and we can usually schedule it within 3 to 5 business days. The audit covers blower door testing, thermal imaging, insulation inspection, and duct leakage testing, all focused on finding exactly where your Owens Corning insulation is underperforming. As an independent Owens Corning service provider, we give you straight numbers and honest findings, not a sales pitch.
If you’ve got Owens Corning insulation in your Glendale home and your energy bills keep climbing, or some rooms never hold temperature, this page is for you. We’re Walt’s Insulation, locally owned and owner-operated since 2000. Call (747) 246-7237 and a live person answers, 24/7.
Key Takeaways
- Home energy audits in Glendale run $199 to $450 for most homes.
- Blower door and thermal imaging catch what a visual inspection misses.
- Owens Corning fiberglass and foam products age differently, and the audit tells us which you have and how it’s holding up.
- We’re independent, not a manufacturer rep. The findings are yours, not a sales script.
- Free second opinion on any written estimate, no trip charge inside our service county.
How Owens Corning Products Fail - and How We Fix Them
Owens Corning makes solid insulation, but no product is immune to time, pests, moisture, or bad installation. Here’s what we actually find in Glendale homes:
- Pink Fiberglas batts settling in attics. Owens Corning R-30 and R-38 batts lose loft over 15-plus years, especially in the hot, dry Glendale summers. When fiberglass compresses, its R-value drops fast. The audit’s thermal imaging shows us exactly which bays are thin, and we fix it with a proper top-up or full removal and replacement.
- AttiCat blown-in fiberglass unevenly distributed. We see a lot of Owens Corning AttiCat blown-in insulation in Glendale attics that was installed quickly and unevenly. Blower door testing reveals where air is moving through the thin spots. The fix is re-blowing to a uniform depth, and we verify the R-value matches what the bag claims.
- Foam insulation gaps around can lights and plumbing penetrations. Owens Corning foam products, including Foamular XPS board, get installed around tricky areas and small gaps get missed. Those gaps turn into air leaks that a blower door test pinpoints within minutes. We air seal before we insulate, because insulation without air sealing is like a down jacket with the zipper open.
- Vapor barrier failures in crawl spaces. In Glendale’s older hillside homes, Owens Corning fiberglass batts installed in vented crawl spaces wick moisture from the soil. The paper facing breaks down, the batts sag, and you get mold that an energy audit’s moisture reading catches early. We recommend encapsulation with a proper vapor barrier, then re-insulate the foundation walls.
- Duct leakage undoing good insulation. Here’s the thing most audits miss: you can have perfect Owens Corning attic insulation and still lose 20 to 30 percent of your conditioned air through leaky ducts. Our duct leakage test measures that loss directly. If your ducts are leaking, sealing them makes your Owens Corning insulation actually do its job.
Our Owens Corning Home Energy Audit Process
Here’s how a Glendale home energy audit works when you call us:
- 1
Call and talk to a person. You call (747) 246-7237. Walt’s team answers live, 24/7. No voicemail, no answering service. We ask a few questions about your home and schedule your audit.
- 2
Walkthrough and visual inspection. Our background-checked, uniformed technician arrives and walks your home with you. We look at attic access, crawl space, duct layout, and visible insulation. We look for the specific Owens Corning products in your home and check their condition.
- 3
Blower door test. We depressurize your home and measure total air leakage in CFM (cubic feet per minute). This gives us a hard number for how leaky your house is, and it shows us where the air is getting in.
- 4
Thermal imaging inspection. The infrared camera reads surface temperatures and reveals missing or compressed insulation, air leaks, and moisture problems hidden behind walls and ceilings.
- 5
Duct leakage test. We pressurize your duct system and measure exactly how much conditioned air never reaches your rooms. This is where many Glendale homes lose the most efficiency.
- 6
Straight findings, no pressure. We sit down, show you the numbers, and tell you what actually needs fixing. If the honest answer is “your insulation is fine, here’s the one gap causing the problem,” that’s what you’ll hear. The report is yours. Every repair we recommend is covered by the Done Right Promise, our lifetime workmanship guarantee.
What Owens Corning Home Energy Audit Costs in Glendale
Here’s what a home energy audit runs in Glendale, straight numbers:
| Service | Typical Glendale Cost |
|---|---|
| Blower door test only | $199 – $299 |
| Full energy audit (blower door + thermal imaging + duct test) | $299 – $450 |
| Large homes (3,500+ sq ft) or complex layouts | $450 – $600 |
| Attic insulation upgrade after audit (typical Glendale R-38 to R-60) | $1,800 – $3,500 |
| Duct sealing after audit | $400 – $1,200 |
What moves the price: home size, number of floors, crawl space vs. slab, and whether we’re testing multiple zones. Every audit quote is upfront, before we start. Estimates are free. Call (747) 246-7237 for an exact quote and mention you found us online. Seniors and veterans get 10% off, always. We also offer a free second opinion on any written estimate you’ve received from another company.
Why Glendale Homeowners Call Walt’s Insulation for Owens Corning Work
Glendale homeowners have been calling us for over 25 years because we do what we say we’ll do. Walt Brenner started this business in 2000, and we’ve been working these neighborhoods ever since. You’ve probably seen the truck parked near the Americana on Brand. The one down the road, not an 800 number.
Our techs know Owens Corning products because we install and service them every week. We also work with Reflectix, Rockwool, Johns Manville, CertainTeed, Knauf, Icynene, Demilec, and GreenFiber, so we recommend what’s right for your home, not whatever one manufacturer pushes. Every audit and repair is covered by the Done Right Promise. If it’s not done right, we make it right. No runaround. And when you call, a live person answers. 24/7. That’s not a feature we list on a brochure. It’s just how we run our business.
Do it right the first time or you’ll be doing it twice, and the second time costs more.
FAQs
Yes, if your Glendale energy bills run higher than your neighbors’ or you have rooms that never hold temperature. A $299 to $450 audit typically finds enough air sealing and insulation gaps to pay for itself within a year or two. Call (747) 246-7237 and we’ll tell you over the phone whether an audit makes sense for your house.
We document everything during the audit, including condition, depth, and installation quality of your Owens Corning insulation. If there are manufacturer defects or installation problems, our report gives you the documentation you need for a warranty claim. As an independent Owens Corning service provider, we don’t handle warranty claims for the manufacturer, but we do make sure your paperwork is complete and correct.
Most Glendale audits are scheduled within 3 to 5 business days. If you have an urgent issue, like a moisture problem or a sudden spike in energy use, call us and we’ll do our best to get there sooner. We answer the phone 24/7.
In most cases, fixing the specific problems the audit finds costs less than re-insulating, and it delivers most of the benefit. A blower door test and thermal imaging tell you exactly where the issues are. Then we price the fix. If re-insulating makes more sense, we’ll tell you that too. We’d rather give you the honest answer than sell a bigger job. Call (747) 246-7237 for a free estimate.
Sometimes, yes. We hold same-day slots for urgent cases. Call (747) 246-7237 as early as you can and we’ll tell you straight whether we can make it today. A live person will answer, and a real Glendale-based tech will be at your door, not a subcontractor.
Written by Walt Brenner, Owner, Walt’s Insulation at Walt’s Insulation, serving Glendale and nearby areas.